Drying Products

Silica Sand Dryer manufacturers

Silica Sand Dryer

We offer our clients a fine and excellent grade Silica Sand Dryer, which is used in drying and cooling of materials that flow freely. This product is provided with a rotating shell which is supported on rollers & tires. Our product is available in various configurations.

It requires 7.5HP to 25 HP electric motor to work efficiently. The Silica Sand dryer we provide, is very helpful in various process, which are as follows:

  • Large production capacity,
  • Continuous operation;
  • Simple structure,
  • Easy to operate; less failure,
  • Low maintenance costs;
  • A wide range of application,
  • Fluid resistance is small,
  • You can use it to dry granule-like material, for those adhesion material
  • It is also very beneficial;
  • Operating flexibility, production flow allows the product to have a greater fluctuation range, will not affect the quality of the product
  • Cleaning easy
  • Simple system
  • Flexibility in fuels used.
  • In this type of Dryer model is not fixed.
  • We are manufacturing dryer on the basis of moisture content, product suitability and Capacity.
  • As per that we decide which dryer suits for your product as Continuous type, Batch Type, Rotary Kiln, Activated Drum Dryer, Tunnel Dryer
  • Available in Different Models as per client requirement.
  • Manufacturing from 100kg/hr to 20 Tons/Hr. ***
  • Set as per your requirement
  • Using Different type of Plates which has sustainability in heating scope.
  • We are manufacturing continuous dryer as per client requirement ;
  • Using Mild Steel,
  • Using SS-202(Stainless Steel),
  • Using SS-304 (Stainless Steel)
  • Using SS-316 (Stainless Steel)
  • Using MS-SS Combination
  • Using MS-SS- Gladded Plates
  • Available in all Contraction

Techno Enterprise's Rotary dryer is specially developed for vast range of applications:

  • Buildings & Constructions
  • Minerals & Ores
  • Food products
  • Soil remediation
  • Chemicals
  • Pigments
  • Starch Products
  • Pesticides and fertilizers
  • Pond ash to fly ash
  • Saw Dust
  • Salt Dryer
  • Many Other Drying Applications
  • Sands, Limestone's, Stones and Soil, Ores, fertilizers, wood Chips, Coal, Iron-sulphate, filter cakes, sewage sledges Etc..

Firstly, use one belt conveyor or bucket elevator to send the Fly Ash into the drum of Fly Ash Dryer.

  • Conveyed from the feed screw directly into the Fly Ash Rotary Dryer, raised by the drum wall panels repeatedly, and scattered by the crushing blow devices.
  • Materials and the negative high-temp media are combined sufficiently to complete heat and mass transfer process.
  • Result of the drum wind angle and induced air, feed materials move slowly, and discharged from the spiral after drying, exhaust gas handled by the cyclone, venting to the atmosphere.
  • The dryer adopts the riding wheel device, which make the riding wheel and the rolling ring linear touch all the time. Thus the abrasive and the power loss are greatly reduced. The granularity and the moisture and be controlled by the customer's demand. When drying the coal slurry, the product moisture can be less than 5% and the granularity and be less than 6mm.
S.N Size Processing HP RPM Input Output Coal Feed inlet
MM Tons Motor Mint. Moisture Moisture Calorific Value Temperature
1 1200 x 10000 1.8-5 7.5 4 15-25% <8% >5500 KCAL/KG 700±50°C
2 1200 x 12000 1.8-5 11 4 15-25% <8% >5500 KCAL/KG 700±50°C
3 1500 x 14000 10-12.5 15 3 15-25% <8% >5500 KCAL/KG 800±50°C
4 1800 x 14000 15-18 18.5 3 15-25% <8% >5500 KCAL/KG 800±50°C
5 2000 X 16000 20-25 18.5 2.5 15-25% <8% >5500 KCAL/KG 800±50°C
6 2200 x 18000 25-30 22 2.5 15-25% <8% >5500 KCAL/KG 800±50°C